Steps, methods and precautions for cleaning wire mesh products showing rust stains

In life, we find that stainless steel products such as stainless steel pots, stainless steel stair handrails, stainless steel doors and windows are difficult to corrode, but yellow rust spots can still be seen on the surface, which makes everyone very helpless. Here I want to summarize this experience article on stainless steel rusting and cleaning for you.

Steps for cleaning stainless steel

1. The gentle way to clean stainless steel is to simply wipe the surface with hot water and a clean soft cloth, then dry metal with another soft cloth to prevent water spots thoroughly. I was amazed at how much dirt was on the surface, just this step. When using this or any other method, keep in mind that stainless steel has "grains" running in one direction across the entire surface of the metal with tiny grooves and its best grains, rather than scrubbing across it to clean . Some people will tell you that this is to avoid scratching the metal or staying in the grain of dust particles, where they can cause rust to form. This is most likely true, but scrubbing the grain also seems easier and more effective.

2. If regular water leaves some dirt or grease, try adding a mild detergent to the water. The method I use is derived from natural, biodegradable dish soap and find it misses by removing a little water, including some oils. If you're cleaning stainless steel pots or utensils, this is the better way to use them. Food on cooked food can usually be removed by soaking the pan in soapy water with a mild wash with a sponge pad. Don't be impatient, use steel wool, it can scratch the stainless steel or leave behind particles that can rust. Again, remember to rinse and dry the stainless steel after cleaning.

3. The grease can be dissolved by rubbing alcohol on a soft cloth. I was impressed with how the grease shut off my pizza oven. Some of the thicker deposits didn't respond to a one-off cloth, but I've been rubbing alcohol on them, and they're completely gone within a minute or two. As with other methods, it is important to rinse off the alcohol and dry so that it has a shiny metal.

4. Stubborn or burnt-on stains can be scrubbed off with a soft cloth and a paste of baking soda and water, baking soda is lightly abrasive, so it's a good idea to test this method on a small, concealed Areas of stainless steel make sure you won't have scratches. When I got to this point, I was able to remove almost all stains and discoloration from my pizza oven. In fact, I was so happy with how it worked that I rubbed a polishing paste above the stove. Remember to rinse off all traces with COFCO's stainless steel scrub and baking soda, before drying with a soft cloth.

5. If you use all the steps listed above, like me, you may have to wait until the end to rinse and dry the stainless steel. I used a clean damp cloth to wipe off the residue from the products I used, then rinsed the cloth with clean water, the metal the second time around. Drying left some streaks, so I sprayed the metal with a little bit of 7th Generation's Natural Glass Surface Cleaner and wiped it off with a dry cloth. By the way, glass cleaner to remove fingerprints stainless steel is not dirty and great.

Precautions for cleaning stainless steel rust stains

A. When the protective layer of the passive film is damaged due to scratches, deposits and bleaching agents, stainless steel will indeed rust.

B. The beginning of rust is small pits and cracks.

C. Use appropriate tools. Do not use steel wipes, wire brushes or scrapers.

D. Use chlorinated alkali detergent at the recommended strength.

E. Demineralized water. Use as many filters and softeners as possible.

F. Wipe off the residual water containing suspended detergent immediately. Staying on stainless steel for too long can cause rust.