What are the specifications of stainless steel wire?

Stainless steel wire, also known as stainless steel wire, is made of stainless steel as raw materials of various specifications and types of silk products. The origin is the United States, the Netherlands, and Japan. The cross-section is generally round or flat. Common stainless steel wires with good corrosion resistance and high cost performance are 304 and 316 stainless steel wires. It pulls the wire rod or wire blank from the die hole of the wire drawing die under the action of the drawing force to produce the metal plastic processing process of small section steel wire or non-ferrous metal wire. Wires of different cross-sectional shapes and sizes of various metals and alloys can be produced by drawing. The drawn wire is accurate in size, smooth in surface, simple in drawing equipment and mold, and easy to manufacture.

stainless steel wire factory

Generally, according to austenite, ferrite, duplex stainless steel and martensitic stainless steel, it is mainly divided into 2 series, 3 series, 4 series, 5 series and 6 series stainless steel.

316 and 317 stainless steel (see below for the properties of 317 stainless steel) are molybdenum-containing stainless steels. The molybdenum content of 317 stainless steel is slightly higher than that of 316 stainless steel. Due to the molybdenum in the steel, the overall performance of this steel is better than that of 310 and 304 stainless steel. Under high temperature conditions, when the concentration of sulfuric acid is lower than 15% and higher than 85%, 316 Stainless steel has a wide range of uses. 316 stainless steel also has good resistance to chloride attack, so it is usually used in marine environments. 316L stainless steel has a maximum carbon content of 0.03 and can be used in applications where annealing after welding cannot be performed and maximum corrosion resistance is required